Barrier walls come in a vast array of shapes and sizes. There are many different concrete barrier walls in use today. Some states share the same barrier wall design; other states use several different designs. Choosing the right concrete barrier lifter or jersey barrier picker is not difficult. Here are a few parameters that you need to know before choosing the correct Kenco Barrier Lift:
- The weight of the concrete barrier.
- The dimension across the top. To get this dimension, extend a straight edge up each side past the top of the wall (this will give the most accurate measurement, as most barrier walls have a small radius on the top corners), then measure across the top to each straight edge. You can use the print that is available from the manufacturer of the precast concrete barrier wall as well.
If there is any doubt to your particular barrier wall, send a copy of the print to sales@kenco.com and we will make the determination for you.
How do I determine the specifications of my current Kenco barrier lifter?
Kenco Barrier Lifters have a Serial Tag with information that includes the serial number, weight capacity and dimensional range. If for some reason the serial tag becomes unreadable, destroyed or is missing, the serial number is also stamped into the lift bail or a crossing member on the top surface of the barrier lifter, which we can use to track needed information. Feel free to call with any questions regarding the use of our barrier lifter.
What other considerations should be taken into account?
Remember, just because the lifter fits over the wall doesn’t mean it will lift the wall safely. It is up to the end user or operator to verify the correct sizing. For instance, if you were to use our old model KL9000 with a 6” to 9” range on a precast concrete barrier wall that weighed 7,200 pounds and correctly measured to 9-1/4”. The lifter may fit over the barrier and have enough capacity, but the problem is that the automatic actuator may not stroke far enough to rotate the correct amount to let it release. The barrier lifter may incorrectly pick up the concrete barrier wall, because the pads will rotate and cam them into the barrier. This will cause damage to the barrier lifter and it could possibly drop the barrier wall, which may seriously injure site personnel. In this case, the old style KL9000 with a 9” to 12” range was recommended.
Since 2014, all standard models of the barrier lift are manufactured with a 6 to 12 inch grip range, wider pads to increase total surface contact, a fuller pad angle rotation to accurately contour to the wall slope, and integrated handles on both sides of the lifter. The older models are now obsolete, though it may take some time, because some companies are still using Kenco jersey barrier pickers that were purchased over twenty years ago.
Introducing the Kenco Double Barrier Lift
/in Use CasesNow you can lift TWO barrier walls at a time with the Double Barrier Lift!
Kenco furnishes attachments for excavators from mini to 200,000 pounds, wheel loaders from 1 to 40 yards, dozers, and skid steer machines.
Crazy Horse Memorial meets the Kenco RockLift
/in Use CasesCrazy Horse, one of the most notable Native American war leaders in history, could have never imagined how he would someday be memorialized. A man who had been characterized as being shy or aloof now towers over 500 feet above the Black Hills in South Dakota. The Crazy Horse Memorial finished product will surpass Mount Rushmore as having the largest sculpture of the human head measuring a whopping 87 feet tall! It will also be the largest sculpture in the world upon completion but this project hasn’t come without delays.
For years Crazy Horse sat untouched, waiting for funding to finish the project. But with every few steps back, comes several more forward, and once again the mountain is buzzing with excavators and workers. You can imagine the absolute honor and privilege it was when Kenco was contacted for help. They needed a way to move rock atop the mountain from the place it has been cut to a safe location away from the job site, with the safety of their workers being at the utmost concern. Kenco of course, had a solution and within a short time period, our Rocklift was put into action. Images and videos of the site show the nearly completed face of Crazy Horse almost casting a watchful eye as each rock is meticulously chipped away and carried with ease. Workers are safe and the mountain has been awoken once again.
Not every Kenco Rocklift will be as lucky to be a part of such a project, but every Rocklift will perform like the last – safely and consistently. No matter the size of the project, there truly is a lift for it and this project is a true testament to that.
Kenco Pipe Lift in Colombia
/in Press Releases & NewsKenco PL2250 Pipe Lifts are being used on the largest project currently underway in Colombia, South America. This is the first project where they have laid this size of pipe in Colombia utilizing the Surelock mechanical pipe joint system. Butler Tech has been contracted for the project, and they are seen in the photos working near the coastal village of Tolu.
Gabe Guevara of Surelock had this to say about our pipe lifting tongs: ‘Thought you might to see your Pipe Lifts in action. They work great. Best and safest lifts we’ve ever used. These pipe lifts in Columbia project have increased our productivity by more than 25%, and we’ve received praise from our client for the safety and ease of operation. We are extremely proud of these lifts.’
Kenco at ICUEE 2015
/in Trade ShowsMake plans to visit us in Louisville, Kentucky for the ICUEE Trade Show, exhibiting from September 29th – October 1st, at the Kentucky Exposition Center. We will be displaying our incredible Kenco lifting products and attachments in the South Wing, booth 3626.
Precast Show 2016
/in Trade ShowsThe Precast Show is being held in Nashville, Tennessee from March 3rd to March 5th, 2016 at the Gaylord Opryland Hotel. Kenco will be displaying and demonstrating a variety of their incredible lifting attachments. Stop by to visit them in Booth 1070.
CONEXPO-CON/AGG 2017
/in Trade ShowsKenco will be exhibiting and demonstrating our incredible line of lifting attachments at Conexpo 2017 in Las Vegas, March 7 – 11.
Kenco Pipe Lifting Clamp
/in Use CasesKenco offers an easy, safe and cost-effective way to move RCP, ductile iron, PVC or steel pipe. The Pipe Lift will grab and release pipe from inside the cab. It will double production of pipe installation versus methods using slings and cables.
No additional hydraulics are required to put the Pipe Lift into operation – it hooks up with just a lifting strap and shackle. The unique design of this lifter machine for construction allows each model to grip a wide range of pipe sizes. Centering the lifter on the pipe is not necessary and its narrow profile makes removal from tight trenches easy.
This pipe holder clamp machine operator simply sets the lifter down onto the pipe. This causes it to grip onto the pipe, and it will not release until it has been set down firmly into position.
The PIPE LIFT is available in sizes to accommodate all types of pipe from 7.62 cm OD to 3,855.5 cm OD. Model capacities are available from 680.38 kg to 3,855.53 kg.
Published:
Feb 16, 2015
Canadian Underground Infrastructure: Kenco Pipe Lift
Which Kenco Barrier Lift do I Need?
/in Education & How ToBarrier walls come in a vast array of shapes and sizes. There are many different concrete barrier walls in use today. Some states share the same barrier wall design; other states use several different designs. Choosing the right concrete barrier lifter or jersey barrier picker is not difficult. Here are a few parameters that you need to know before choosing the correct Kenco Barrier Lift:
If there is any doubt to your particular barrier wall, send a copy of the print to sales@kenco.com and we will make the determination for you.
How do I determine the specifications of my current Kenco barrier lifter?
Kenco Barrier Lifters have a Serial Tag with information that includes the serial number, weight capacity and dimensional range. If for some reason the serial tag becomes unreadable, destroyed or is missing, the serial number is also stamped into the lift bail or a crossing member on the top surface of the barrier lifter, which we can use to track needed information. Feel free to call with any questions regarding the use of our barrier lifter.
What other considerations should be taken into account?
Remember, just because the lifter fits over the wall doesn’t mean it will lift the wall safely. It is up to the end user or operator to verify the correct sizing. For instance, if you were to use our old model KL9000 with a 6” to 9” range on a precast concrete barrier wall that weighed 7,200 pounds and correctly measured to 9-1/4”. The lifter may fit over the barrier and have enough capacity, but the problem is that the automatic actuator may not stroke far enough to rotate the correct amount to let it release. The barrier lifter may incorrectly pick up the concrete barrier wall, because the pads will rotate and cam them into the barrier. This will cause damage to the barrier lifter and it could possibly drop the barrier wall, which may seriously injure site personnel. In this case, the old style KL9000 with a 9” to 12” range was recommended.
Since 2014, all standard models of the barrier lift are manufactured with a 6 to 12 inch grip range, wider pads to increase total surface contact, a fuller pad angle rotation to accurately contour to the wall slope, and integrated handles on both sides of the lifter. The older models are now obsolete, though it may take some time, because some companies are still using Kenco jersey barrier pickers that were purchased over twenty years ago.
Pavement removal bucket
/in Use CasesThe Kenco Slab Crab is a pavement removal bucket specifically engineered to expedite the removal of asphalt, concrete roadway and bridge decking. The Slab Crab’s unique design allows the operator to have complete control over the slab during the removal and loading process. This pavement removal bucket has a flat bottom which allows the operator to remove bridge decking in tight quarters. This concrete bucket with platform also allows for removal of road decking without disturbing the subbase.
The excavator operator is able to utilize a cantilever effect by tilting the Slab Crab which allows the slab to easily slide into the opening of this pavement removal bucket. The tapered opening makes it easy for the operator to acquire the slab and that same taper enables the Slab Crab to accommodate a great range of thicknesses. Once a slab is obtained, the operator can simply lay it on a flatbed, place in the back of a dump truck or stack it in a desired location. With contractors reporting that the Kenco Slab Crab increased productivity by 80% or better, it’s easy to see why this attachment should be in every company’s equipment arsenal. Check out also other Kenco lifiting products here.
Equipment used to lift pipe
/in Use CasesKenco offers a variety of pipe lifting equipment. Whether its concrete, ductile iron, pvc, corrugated, steel, terracotta or the like, Kenco has you covered. The Pipe Lift’s design allows each model to handle multiple pipe diameters. Not only does it safely lift but the operator can use it to push the pipe together. Since the Pipe Lift is automatic, there is no need to have a laborer in the ditch to disengage the lifter from the pipe once the joint is installed. Now that’s productivity.
Say you have pipe dimensions that fall outside our standard models. No worry, Kenco’s engineering department is second to none and will gladly design the lifter you need. From standard models starting with 4” pipe and the largest to date being a custom model for 142”, the possibilities are endless. Looking for another option to move pipe? How about the Kenco Pipe Hook. This pipe lifting attachment basically looks like an elongated “C” or its sometimes referred to as a hairpin. Regardless of the analogy, the design is simple and very effective. The operator slides the lower section into one end of the pipe and lifts. To make the process easier on the operator, our clever engineering staff has replaceable polyurethane pads on all “Pipe” contact areas. Each model of Pipe Lift has a very generous range. The smallest starting at 10” and the largest exceeding 60000 pounds. Safely increase productivity.
Seriously, what’s not to like here. Well, Kenco also offers a Super Lift, that when equipped with the correct bolt on tine set, can move just about anything. Rocks, logs, brush, barrier, block and you guessed it, Pipe. Each Super Lift model offers 3 pipe tine sets that cover just about anything. If not, let us know what you have, our engineering staff is up to the challenge. When it comes to equipment used to lift pipe, Kenco has you covered.