Warranty on Kenco Lifters

Kenco’s heavy equipment warranty information is as follows:

1. KENCO Corporation (KENCO) warrants the Kenco lifting device* (not including pads or consumable items) sold by KENCO to be free from proven defects in material and workmanship for a period of six (6) months from the delivery date to the original customer.

2. Warranty is limited to replacement of parts and/or assemblies, which upon inspection by KENCO are deemed to be defective in material, workmanship, or both.

3. Warranty shall not extend to products that have been altered or repaired in any way without the express written consent of KENCO.

4. Warranty shall not extend to any product that has been misused, abused, or improperly applied or any defect resulting thereof.

5. Defects and corrosion that are the result of improper storage and/or maintenance are not  warrantable.

6. Wear items such as Pads, Pins or Lifting bails etc. are not considered for warranty claims.

B. Disclaimer
1. THIS WARRANTY IS EXCLUSIVE AND IN LIEW OF ALL OTHER REPRESENTATIONS AND WARRANTIES EXPRESSED OR IMPLIED, AND KENCO EXPLICITLY DISCLAIMS AND EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE END USER BE ENTITLED TO ANY CONSEQUENTIAL, INCIDENTAL OR CONTINGENT DAMAGES OF ANY KIND ARISING OUT OF BREACH OF CONTRACT, WARRANTY (INCLUDING NEGLIGENCE AND STRICT LIABILITY)
OR OTHER THEORIES OF LAW, WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY KENCO, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.

Contact 800-653-6069 with questions.

*includes Kenco Barrier Lift, Multilift, Rocklift, Pipe Hook, Pipe Lift, Monument Lift

Protected: ZoneGuard Lift – Now in Design Stages

There is no excerpt because this is a protected post.

Set Capstone Blocks Easily

multilift on stack of capstone pieces placing capstone piece on retaining wall with multilift positioning multilift with capstone for placement multilift in foreground of excavator

The Kenco Multilift has a large grip range. Shown here is the ML3K5T32 which can grip from 5″ all the way up to 32″ set at approximately a 30″ width for capstone sections. A completely mechanically driven latch (actuator) located at the center of the lift acts as a lock to either hold the grip surfaces open or release them to perform a lift. Its design lends to simple modifications for increase capacity, grips, height restrictions and more.

The Multilift is not only for capstone blocks. It can be used for retaining wall, steps, slabs, basin and much more. It is OSHA approved, made in the USA, and conforms to the current infrastructure bill of 2023.

Several standard add-ons are already available including serrated rock feet, extended legs, manhole legs, standoffs and more. Visit our online store for a 24/7 price quote and inventory status.

Product Review of KL9000

concrete wall on truck bed in snow“We recently purchased a Kenco barrier lifting clamp with 9,000 lb lifting capability. We used to lift these concrete jersey barriers by running steel bars through the center of them and then lifting off those bars with slings. This method was not always ideal. Using this Kenco clamp has made this task more efficient and safer. A really great product for lifting construction items.”

Aaron Childs

Airdrie, Alberta, Canada

Kenco C Hook Review

c shaped hook for lifting pipeThe Kenco pipe hook has been a game changer! Adapting from a lifting strap,  to the Kenco pipe hook eliminates the hassle and struggles of using lifting straps. Immediately saving time hooking and unhooking pipe, as well as improved touch and feel slamming bell and adjusting grade if necessary!

Nick Leonardo

Rapid City, South Dakota

 

 

Nightwork with the Kenco Barrier Lift

The practice of conducting road construction during the night helps prevent worker and commuter accidents.

Testimonial on Mechanical Pipe Hook

Elliptical and round concrete sewer pipe can be unloading, installed and removed with a Kenco Pipe Hook.

National Memorial Cemetery – Phoenix, Arizona

The ML8K10T68 Multilift with standoffs is shown here installing 1,800 lb solid stone Columbarium caps during Phase 3…

Renovation at Governor’s Mansion

A $1.9 million courtyard redesign project is in the final stages at Pennsylvania’s Governor’s Mansion, Harrisburg, PA.

J&N Testimonial of the Kenco Barrier Lift

Kenco is still accepting video and photo submissions for marketing purposes. Learn More…