Q: Multilift: Lifter will not collapse under its own weight after releasing tension.

Check how the lifter is set on the object being lifted Is the lifter oriented perpendicular to the gripping surfaces? No Ensure lifter is oriented as close to perpendicular gripping surfaces as possible. Are the feet being obstructed? Yes Place object in a location where there is enough clearance for the feet to move freely. Check for proper tightening of bolts. Are the bolts able to be rotated by hand when lifter is at rest? No Loosen bolts until they can rotate by hand.

Q: Multilift: Lifter will not collapse under its own weight after releasing tension.

Check how the lifter is set on the object being lifted Is the lifter oriented perpendicular to the gripping surfaces? No Ensure lifter is oriented as close to perpendicular gripping surfaces as possible. Are the feet being obstructed? Yes Place object in a location where there is enough clearance for the feet to move freely. Check for proper tightening of bolts. Are the bolts able to be rotated by hand when lifter is at rest? No Loosen bolts until they can rotate by hand.

Question 1

Multilift: Lifter will not collapse under its own weight after releasing tension.

Kenco Content · Accepted Answer

Check how the lifter is set on the object being lifted
1. Is the lifter oriented perpendicular to the gripping surfaces?
  1. No
    1. Ensure lifter is oriented as close to perpendicular gripping surfaces as possible.
2. Are the feet being obstructed?
  1. Yes
    1. Place object in a location where there is enough clearance for the feet to move freely.
Check for proper tightening of bolts.
1. Are the bolts able to be rotated by hand when lifter is at rest?
  1. No
    1. Loosen bolts until they can rotate by hand.

Question 2

Multilift: Lifter will not collapse under its own weight after releasing tension.

Kenco Content · Accepted Answer

Check how the lifter is set on the object being lifted
1. Is the lifter oriented perpendicular to the gripping surfaces?
  1. No
    1. Ensure lifter is oriented as close to perpendicular gripping surfaces as possible.
2. Are the feet being obstructed?
  1. Yes
    1. Place object in a location where there is enough clearance for the feet to move freely.
Check for proper tightening of bolts.
1. Are the bolts able to be rotated by hand when lifter is at rest?
  1. No
    1. Loosen bolts until they can rotate by hand.

Multilift: Lifter will not collapse under its own weight after releasing tension.

Multilift: Lifter will not collapse under its own weight after releasing tension.

Leave a Reply

Leave a Reply Cancel reply